Error code · Washer

Kenmore 110 HE5 Steam Washer Code F64: Steam feed valve failed

Medium · inspection needed

Code: F64
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F64 means

On Kenmore HE5 Steam front-load washers whose model numbers start with 110., a Whirlpool-built platform, F64 means the steamer inlet valve failed. That valve is part of the inlet water valve assembly and feeds water to the steamer, so a failed section can leave the steamer dry. You will see F64 on the display and the steam function stops. Because the valve sits inside the assembly, the repair usually involves that whole assembly.

Common causes of F64

Steamer section of the inlet water valve assembly that does not open
Wiring to the inlet water valve assembly
Control output that drives the steamer inlet valve

✓ One safe check you can try

1. Check that both water faucets behind the washer are fully open. 2. Make sure the fill hoses are not kinked or crushed. 3. Try a cycle that does not use steam. 4. Do not open the cabinet to reach the valve. Leave the washer unplugged if F64 keeps appearing.

! Why to stop there

Whether the steamer section of the valve is the cause
Whether the wiring or the control output is also involved
Whether regular fills through the same valve assembly are still normal

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure rL / OU / F34Kenmore 110 HE Front-Load Washer Codes rL, OU and F34: Clothes in the Clean Washer cycle

F64F64 questions

Is the steamer valve separate from the regular fill valves?

It means the steamer inlet valve failed. On this Whirlpool-built platform that valve is part of the inlet water valve assembly and sends water to the steamer, so steam cycles stop.

Does F64 affect normal washing?

It may not, since normal fills use other sections of the assembly. Still, they share one housing, so we test the whole assembly before we quote a repair.

Is a leak possible with F64?

The code itself names a valve that did not work, not a leak. If you see water near the washer, close the faucets and unplug it, then tell us when you book.

Book a visit

Still seeing F64?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152