Kenmore 790 Induction Cooktop Code 2-54 numeric (790 induction): Key, Board and Sensor Ranges
Kenmore induction cooktops whose model numbers start with 790 report problems with numbers instead of E-codes. The documented set runs from 2 to 54. Numbers 2 through 25 describe key defects on the touch controls, 30…
- Code
- 2-54 numeric (790 induction)
- Appliance
- Cooktop
- Brand
- Kenmore
- Warranty
- 30-day workmanship
What 2-54 numeric (790 induction) means
Kenmore induction cooktops whose model numbers start with 790 report problems with numbers instead of E-codes. The documented set runs from 2 to 54. Numbers 2 through 25 describe key defects on the touch controls, 30 through 40 point to the power, filter or control boards, and 51 through 54 mean an element temperature sensor has failed. You will usually see the number in the display and one or more cooking zones will refuse to heat or shut off early.
Common causes of 2-54 numeric (790 induction)
- Which number range the display shows: keys, boards or sensor
- Touch keys with moisture or residue across them
- Harness connections between the control and power boards
- Element temperature sensor circuit when the number is 51 to 54
1. Switch every zone off and let the glass cool completely. 2. Write down the exact number shown. 3. Wipe spills and moisture off the touch keys and the glass around them. 4. Take pans off the surface. 5. Do not remove the cooktop or open the housing; the power electronics sit under the glass.
- The number tells us which circuit to test, but not which of the board, the harness or the element sensor is responsible.
- We test the harness and the sensor reading before any board is quoted.
- You get a written price before we replace anything, and the work carries our 30-day workmanship warranty.
Why does my Kenmore induction cooktop show a plain number?
Models whose numbers start with 790 use a numeric set instead of E-codes. Each range of numbers covers a group of circuits, so the exact number you see matters a great deal when you call us to book.
Does a number between 51 and 54 mean the whole cooktop is bad?
No. That range is about an element temperature sensor, which is one circuit among several. We check the sensor and its wiring first, before anything larger is recommended or priced for you.
Can I keep cooking on the other zones?
If one zone shows a number and the others heat normally, it can be reasonable to wait for the visit. Switch the cooktop off if you notice a burning smell, flickering display or anything unusual.
Still seeing 2-54 numeric (790 induction)?
A technician diagnoses it on site and gives you the price in writing before any work starts.