Kenmore 111 Bottom-Freezer Refrigerator Code r1 Lo / r1 Hi: Fresh-Food Sensor
Kenmore bottom-freezer refrigerators with model numbers starting 111 are a platform with no documented builder. On them, r1 Lo or r1 Hi means the refrigerator compartment temperature sensor reading is out of range, low or high.…
- Code
- r1 Lo / r1 Hi
- Appliance
- Refrigerator
- Brand
- Kenmore
- Warranty
- 30-day workmanship
What r1 Lo / r1 Hi means
Kenmore bottom-freezer refrigerators with model numbers starting 111 are a platform with no documented builder. On them, r1 Lo or r1 Hi means the refrigerator compartment temperature sensor reading is out of range, low or high. The control loses an accurate view of the fresh-food temperature, so you may find milk too warm, lettuce frozen or the compressor running longer than normal.
Common causes of r1 Lo / r1 Hi
- Refrigerator compartment temperature sensor
- Sensor wiring or connector
- Control board input
1. Note whether the display shows r1 Lo or r1 Hi. 2. Check the door gasket for gaps and keep the vents inside unblocked. 3. Avoid stacking food against the back wall. 4. Do not pry at interior panels for the sensor.
- Whether the sensor is outside its expected resistance range or the wiring is damaged
- Wiring is checked first, because a loose connector gives the same reading as a bad sensor
- Part cost is quoted in writing before we replace anything
Other Refrigerator codes
What do Lo and Hi tell you?
They show which way the sensor reading went out of range, which helps us decide between an open circuit and a short, and so which wire or connector to inspect first.
Is the sensor the only suspect?
No. We check the wiring before the sensor, and the control board last. A loose or corroded connector gives the same reading as a failed sensor, so we rule it out before quoting a part.
Can I keep using the refrigerator?
Usually, but check temperatures daily with a thermometer and move delicate food if the compartment warms. If milk is clearly cooling poorly, call us sooner rather than waiting for the next convenient day.
Still seeing r1 Lo / r1 Hi?
A technician diagnoses it on site and gives you the price in writing before any work starts.
