Error code · Refrigerator

Kenmore 253 French-Door Refrigerator Showing OP in the Refrigerator Display (Open Fresh-Food Sensor)

Medium · inspection needed

Code: OP in Refrigerator Display
Appliance: Refrigerator
Brand: Kenmore
Warranty: 30-day workmanship

What OP in Refrigerator Display means

The 253 model-number prefix on Kenmore French-door refrigerators identifies a Gibson platform, part of the Electrolux and Frigidaire family. OP showing in the refrigerator display means the control sees the fresh-food compartment sensor as an open circuit. With no valid reading, it cannot regulate cooling well, so the compartment may drift warm, freeze produce or cycle oddly. The display keeps showing OP until the circuit is repaired.

Common causes of OP in Refrigerator Display

Fresh-food compartment sensor with an open circuit
Loose or damaged sensor wiring and connectors
Control board sensor input

✓ One safe check you can try

1. Confirm OP appears in the refrigerator display, not the freezer one. 2. Look for items pressed against the back wall or blocking vents. 3. Make sure the doors seal completely. 4. Leave panels and the sensor alone and call us.

! Why to stop there

Whether the sensor has opened inside or the problem is a connection
We inspect the wiring and connectors, then test the sensor's resistance
Replacement of the control is not considered until the sensor circuit is confirmed good

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

SY CE / SY CFKenmore 253 French-Door Refrigerator Code SY CE / SY CF: Control and Display Communication SY EFKenmore 253 French-Door Refrigerator Code SY EF: Evaporator Fan Circuit F1 Lo / F1 HiKenmore 111 Bottom-Freezer Refrigerator Code F1 Lo / F1 Hi: Freezer Temperature Sensor F3 / r3Kenmore 111 Bottom-Freezer Refrigerator Code F3 / r3: Defrost Heater FD Lo / FD Hi / rD Lo / rD HiKenmore 111 Bottom-Freezer Refrigerator Code FD Lo / rD Hi: Defrost Sensor Readings i5 Lo / i5 Hi / iD Lo / iD HiKenmore 111 Bottom-Freezer Refrigerator Code i5 / iD: Ice Maker and Ice Room Sensors Main Board LED 1, 2 or 3 FlickersKenmore 111 Top-Freezer Refrigerator: Main Board LED Flickers 1, 2 or 3 Sensor Failure Main Board LED 4 or 6 FlickersKenmore 111 Top-Freezer Refrigerator: Main Board LED 4 or 6 Flickers, Door and Defrost Heater

OP in Refrigerator DisplayOP in Refrigerator Display questions

What is an open circuit?

It means the control sees no electrical path through the sensor, as though the wire were cut or the sensor itself had opened inside. The control then cannot read the fresh-food temperature at all.

Why is my produce freezing?

Without a sensor reading the cooling cannot be regulated well, so parts of the compartment can get too cold. Move delicate items away from the back wall until we repair the circuit.

How is this different from the freezer OP?

The condition is the same, an open sensor circuit, but a different sensor. The display where OP appears tells us which compartment to test, so we begin with the fresh-food sensor and its connector.

Book a visit

Still seeing OP in Refrigerator Display?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152