Error code · Refrigerator

Kenmore 253 French-Door Refrigerator Code OP in Freezer Display: Open Freezer Sensor

Medium · inspection needed

Code: OP in Freezer Display
Appliance: Refrigerator
Brand: Kenmore
Warranty: 30-day workmanship

What OP in Freezer Display means

Kenmore French-door refrigerators with model numbers starting 253 belong to a Gibson platform from the Electrolux and Frigidaire family. When the freezer display shows OP, the control is reading the freezer temperature sensor circuit as open, as if the sensor or its wire were disconnected. Freezer temperature control becomes unreliable, so the freezer may run too warm or too cold.

Common causes of OP in Freezer Display

Freezer temperature sensor with an open circuit
Wiring or connector between the sensor and the control
Control board sensor input

✓ One safe check you can try

1. Confirm the OP appears in the freezer display and not the refrigerator display. 2. Check that the freezer door closes completely and nothing blocks the vents. 3. Move food to a cooler if the freezer feels warm. 4. Do not remove interior panels to reach the sensor.

! Why to stop there

Whether the sensor itself has opened or a connector has loosened
We check the wiring and connectors first, then measure the sensor's resistance
The board is only suspected after the sensor and wiring both test good

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

F1 Lo / F1 HiKenmore 111 Bottom-Freezer Refrigerator Code F1 Lo / F1 Hi: Freezer Temperature Sensor F3 / r3Kenmore 111 Bottom-Freezer Refrigerator Code F3 / r3: Defrost Heater FD Lo / FD Hi / rD Lo / rD HiKenmore 111 Bottom-Freezer Refrigerator Code FD Lo / rD Hi: Defrost Sensor Readings i5 Lo / i5 Hi / iD Lo / iD HiKenmore 111 Bottom-Freezer Refrigerator Code i5 / iD: Ice Maker and Ice Room Sensors Main Board LED 1, 2 or 3 FlickersKenmore 111 Top-Freezer Refrigerator: Main Board LED Flickers 1, 2 or 3 Sensor Failure Main Board LED 4 or 6 FlickersKenmore 111 Top-Freezer Refrigerator: Main Board LED 4 or 6 Flickers, Door and Defrost Heater OP in Refrigerator DisplayKenmore 253 French-Door Refrigerator Showing OP in the Refrigerator Display (Open Fresh-Food Sensor) r1 Lo / r1 HiKenmore 111 Bottom-Freezer Refrigerator Code r1 Lo / r1 Hi: Fresh-Food Sensor

OP in Freezer DisplayOP in Freezer Display questions

What does OP mean here?

It stands for an open circuit on the sensor input, which is the freezer sensor on this display. The control sees no path through the sensor, as if the wire were cut or the sensor had failed.

Is the Gibson reference important?

It tells us the 253 prefix belongs to a Gibson platform in the Electrolux and Frigidaire family, which guides which parts and wiring we expect to find, so we bring the correct sensor on the visit.

Does the refrigerator side still work?

Often yes, since it has its own sensor and display, but a bad freezer reading can still upset overall temperatures. Check both sections with a thermometer and tell us what you find when you book.

Book a visit

Still seeing OP in Freezer Display?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152