Kenmore 665 Dishwasher Code F1E1: the control module reporting
Kenmore 665-series dishwashers, built by Whirlpool, show F1E1 when the control module reports its own error. Whirlpool lists this as a control module problem and suggests cycling power for 30 seconds. The detail of what inside…
- Code
- F1E1
- Appliance
- Dishwasher
- Brand
- Kenmore
- Warranty
- 30-day workmanship
What F1E1 means
Kenmore 665-series dishwashers, built by Whirlpool, show F1E1 when the control module reports its own error. Whirlpool lists this as a control module problem and suggests cycling power for 30 seconds. The detail of what inside the module triggers it, such as a stuck relay, is not in the documents we found, so we do not claim it. The owner sees the Clean light flash once, pause, and flash once again, and the cycle will not run normally.
Common causes of F1E1
- Main control module logic
- Power supply feeding the control
- Harness connectors at the control
- Brief power glitch that left the control confused
1. Unplug the dishwasher or turn its breaker off for 30 seconds. 2. Restore power and close the door firmly. 3. Start a short cycle and watch the lights. 4. If F1E1 returns, note when it happens in the cycle. 5. Do not open the console or the control cover.
- If a power cycle clears it once, the control may still be marginal and the error can come back.
- We test the supply voltage and connectors before a control is quoted.
- You approve the written price first, and the repair carries a 30-day workmanship warranty.
Other Dishwasher codes
What does F1E1 mean?
On a 665-series, Whirlpool-built dishwasher it points to the control module itself. It is not a water or drain error, so cleaning filters or checking hoses will not change it.
Will unplugging it fix F1E1?
It may clear a one-time glitch, so a 30-second power cycle is worth trying. If the code comes back, the control and its supply need testing by a technician.
Is a new control always needed?
Not necessarily. We check the power supply and the connectors first, since a loose connection can produce the same pattern and costs far less to correct.
Still seeing F1E1?
A technician diagnoses it on site and gives you the price in writing before any work starts.