Error code · Dishwasher

Kenmore Elite 722 Dishwasher Code tE / HE / LE / nE (722-prefix): Thermistor, Heater and Motors

Medium · inspection needed

Code: tE / HE / LE / nE (722-prefix)
Appliance: Dishwasher
Brand: Kenmore
Warranty: 30-day workmanship

What tE / HE / LE / nE (722-prefix) means

The 722 prefix on a Kenmore Elite dishwasher identifies an LG-built platform that uses letter pairs for internal problems. tE is a thermistor failure or very high inlet water, above 194 F. HE is a heater circuit failure, LE is trouble with the motor, and nE is trouble with the Vario motor. BE, by contrast, is oversudsing. You will see the letters in the display and the cycle stops or does not heat properly.

Common causes of tE / HE / LE / nE (722-prefix)

Inlet water temperature above 194 F for tE
Thermistor reading and wiring
Heater circuit for HE
Wash motor for LE and the Vario motor for nE

✓ One safe check you can try

1. Check the house water heater setting, since very hot inlet water can cause tE. 2. Open the door and look for a spray arm that is blocked or stuck. 3. Clean the filters and remove anything lodged in the tub. 4. Make sure the water supply valve is open. 5. Run a short cycle and write down the code.

! Why to stop there

Each pair names a circuit, but a motor or heater code can also come from a connection and not a failed part.
We measure the circuit and the water temperature before a part is quoted.
Price is written first, and our 30-day workmanship warranty applies.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

Start/Resume Blinking / Clean Light Steady / Control Lock LED (665 / Whirlpool-built)Kenmore 665 Dishwasher Code Start/Resume Blinking / Clean Light Steady / Control Lock LED (665 / Whirlpool-built): Normal Prompts Clean Light FlashingKenmore 665 Dishwasher Code Clean Light Flashing: Reading the F and E Count F1E1Kenmore 665 Dishwasher Code F1E1: the control module reporting F6E1Kenmore 665 Dishwasher Code F6E1: User Interface or Main Control F8E4Kenmore 665 Dishwasher Code F8E4: Water Supply, Float and Drip Tray F9E1 / F9E2, F8E1 (H2O), F8E2, F7E2, F8E5, FAE4, FAE5Kenmore 665 Dishwasher Code F9E1 / F9E2, F8E1 (H2O), F8E2, F7E2, F8E5, FAE4, FAE5: Drain, Fill and Motor List IE / OE (722-prefix)Kenmore Elite 722 Dishwasher Code IE / OE (722-prefix): Inlet and Drain Trouble 1-2 / F1E2 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 1-2 / F1E2 (Whirlpool-built HE): Control Communication

tE / HE / LE / nE (722-prefix)tE / HE / LE / nE (722-prefix) questions

What does tE mean?

It points to the thermistor, or to inlet water that is very hot, above 194 F. We check the house water heater setting and the thermistor circuit when we trace it.

How is nE different from LE?

LE refers to the motor in general, while nE refers to the Vario motor. Both appear on 722-series, LG-built Kenmore Elite dishwashers, and each needs its own circuit test.

What about BE?

BE is oversudsing. It comes from the wrong detergent or an unlevel dishwasher, and it is a separate code from the four letter pairs on this page.

Book a visit

Still seeing tE / HE / LE / nE (722-prefix)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152