Error code · Dishwasher

Kenmore 665 Dishwasher Code Clean Light Flashing: Reading the F and E Count

Medium · inspection needed

Code: Clean Light Flashing
Appliance: Dishwasher
Brand: Kenmore
Warranty: 30-day workmanship

What Clean Light Flashing means

A flashing Clean light on a Kenmore 665 dishwasher, a Whirlpool-built platform, is usually how the control reports an error. Whirlpool describes it as a two-part count: the first set of flashes is the F number, then a pause, then the second set is the E number, a longer pause, and it repeats. Seven flashes followed by one flash would be F7 E1, for example. The Kenmore manuals print no table of their own and only say to call for service.

Common causes of Clean Light Flashing

Which F and E pair the flash count spells out
Control board or console reporting the error
Door latch and switch signaling
Power supply to the control

✓ One safe check you can try

1. Count the first set of flashes and write the number down. 2. Wait for the pause and count the second set. 3. Cycle power for 30 seconds by unplugging the dishwasher or switching its breaker off. 4. Restore power and start a short cycle. 5. If the flashing returns, stop and note the F and E numbers for us.

! Why to stop there

A power cycle clears a one-time glitch but does not tell us what caused it.
We use the F and E pair to choose the first circuit to test.
The price is in writing before work, and the work has a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

Start/Resume Blinking / Clean Light Steady / Control Lock LED (665 / Whirlpool-built)Kenmore 665 Dishwasher Code Start/Resume Blinking / Clean Light Steady / Control Lock LED (665 / Whirlpool-built): Normal Prompts tE / HE / LE / nE (722-prefix)Kenmore Elite 722 Dishwasher Code tE / HE / LE / nE (722-prefix): Thermistor, Heater and Motors F6E1Kenmore 665 Dishwasher Code F6E1: User Interface or Main Control F8E4Kenmore 665 Dishwasher Code F8E4: Water Supply, Float and Drip Tray F9E1 / F9E2, F8E1 (H2O), F8E2, F7E2, F8E5, FAE4, FAE5Kenmore 665 Dishwasher Code F9E1 / F9E2, F8E1 (H2O), F8E2, F7E2, F8E5, FAE4, FAE5: Drain, Fill and Motor List IE / OE (722-prefix)Kenmore Elite 722 Dishwasher Code IE / OE (722-prefix): Inlet and Drain Trouble 1-2 / F1E2 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 1-2 / F1E2 (Whirlpool-built HE): Control Communication 2-1 / 2-2 / F2E1 / F2E2 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 2-1 / 2-2 / F2E1 / F2E2 (Whirlpool-built HE): Stuck Key or Control Link

Clean Light FlashingClean Light Flashing questions

How do I read a flashing Clean light?

Count the first group of flashes as the F number, then count the second group after the pause as the E number. Whirlpool describes this for platforms like the 665 Kenmore.

Is it safe to unplug the dishwasher?

Yes, for a 30-second power cycle. Unplug it or switch off its breaker, wait, then restore power and try a short cycle to see whether the pattern comes back.

What if it keeps flashing?

Write down both numbers and call us. They narrow the problem to a specific circuit, so the visit starts with the right test and not a guess.

Book a visit

Still seeing Clean Light Flashing?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152