Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Kenmore specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 955-7152 Get a Repair Quote
Error code · Dishwasher

Kenmore 665 Dishwasher Code F6E1: User Interface or Main Control

On a Whirlpool-built Kenmore dishwasher whose number begins 665, F6E1 points to a user interface error or the main control. The console and the control are not handling the buttons and display together properly. This is…

Medium · inspection needed
Get a Repair Quote(713) 955-7152
Code
F6E1
Appliance
Dishwasher
Brand
Kenmore
Warranty
30-day workmanship

What F6E1 means

On a Whirlpool-built Kenmore dishwasher whose number begins 665, F6E1 points to a user interface error or the main control. The console and the control are not handling the buttons and display together properly. This is not a fill problem: a dishwasher that is not taking in water is reported under a different code, F8E1 or H2O. The owner sees the lights flash six times, pause, then once, and the dishwasher may not respond to the keys.

Common causes of F6E1

  • Console keypad and its ribbon connection
  • Main control board
  • Harness between console and control
  • Moisture near the control panel
✓ One safe check you can try

1. Unplug the dishwasher or turn its breaker off, then restore power. 2. Press the Start button and see whether the unit responds. 3. Wipe the control panel dry. 4. If the flashing stays, write down the count. 5. Leave the console panel closed.

! Why to stop there
  • The code covers both the interface and the main control, and the owner cannot tell them apart.
  • We test the console connection before we price a board.
  • The estimate is written and the work carries our 30-day warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

Start/Resume Blinking / Clean Light Steady / Control Lock LED (665 / Whirlpool-built)Kenmore 665 Dishwasher Code Start/Resume Blinking / Clean Light Steady / Control Lock LED (665 / Whirlpool-built): Normal Prompts tE / HE / LE / nE (722-prefix)Kenmore Elite 722 Dishwasher Code tE / HE / LE / nE (722-prefix): Thermistor, Heater and Motors 1-2 / F1E2 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 1-2 / F1E2 (Whirlpool-built HE): Control Communication 2-1 / 2-2 / F2E1 / F2E2 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 2-1 / 2-2 / F2E1 / F2E2 (Whirlpool-built HE): Stuck Key or Control Link 3-1 / 3-2 / F3E1 / F3E2 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 3-1 / 3-2 / F3E1 / F3E2 (Whirlpool-built HE): Thermistor or Water Sensor 6-2 / 6-4 / F6E2 / F6E4 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 6-2 / 6-4 / F6E2 / F6E4 (Whirlpool-built HE): Float Switch 6-3 / F6E3 (Whirlpool-built HE)Kenmore 665 Dishwasher Code 6-3 / F6E3 (Whirlpool-built HE): Too Many Suds AE / E1 / FE (722-prefix)Kenmore Elite 722 Dishwasher Code AE / E1 / FE (722-prefix): Leak and Overfill Alerts
F6E1F6E1 questions
Is F6E1 a water-fill problem?

No. On 665-series, Whirlpool-built dishwashers, a fill problem shows up as F8E1 or H2O. F6E1 is about the user interface and the main control, not the water supply.

Will cycling power help?

It can. Turn the power off, restore it, and try again. If F6E1 stays on, call us, because the console connection or control will need testing.

Could a spill on the panel cause this?

Moisture near the keys can disturb the interface. Wipe the panel dry, give it a few minutes, and see whether the dishwasher responds to the buttons again.

Book a visit

Still seeing F6E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152
☎ Call the desk ▤ Get a Repair Quote