Error code · Washer

Kenmore 110 HE Front-Load Washer Code F/02: Slow drain

Medium · inspection needed

Code: F/02
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F/02 means

On older Kenmore HE front-load washers whose model numbers start with 110, a Whirlpool-built platform with the F/xx display, F/02 means the washer is draining slowly. Water is leaving the drum too slowly, so the cycle waits and then shows the code. Heavy suds are a common reason, because the drain pump cannot move sudsy water. The owner sees F/02 with water or foam still standing in the drum, and the washer may pause before spinning.

Common causes of F/02

Excess suds that the drain pump cannot push out
Clogged large-item filter in the drain pump
Drain pump that is weak or worn

✓ One safe check you can try

1. Switch the washer off and let any suds settle. 2. Use less HE detergent on the next load. 3. Check that the drain hose behind the washer is not kinked or crushed. 4. Leave the pump filter and pump to us; if F/02 returns, call us.

! Why to stop there

Whether suds, a clog or the pump itself is slowing the drain
Whether the drain hose and standpipe at the wall are clear
Whether the pump runs at full strength under load

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure rL / OU / F34Kenmore 110 HE Front-Load Washer Codes rL, OU and F34: Clothes in the Clean Washer cycle SdKenmore HE2 Front-Load Washer Code Sd: Too many suds SdKenmore HE5 Front-Load Washer Code Sd: Excessive suds SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds

F/02F/02 questions

What does F/02 mean on my Kenmore 110 washer?

It means the washer is draining slowly. Water takes too long to leave the drum, so the control stops the cycle and displays the code.

Can too much detergent cause it?

Yes. The drain pump cannot move sudsy water well, so excess suds are a very common trigger. Use only HE detergent and measure carefully on the next load.

Where is the filter?

The drain pump has a large-item filter that catches debris. Reaching it means working low on the cabinet with water present, so we handle it and give you a written price first.

Book a visit

Still seeing F/02?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152