Error code · Washer

Kenmore 110 VMAX Top-Load Washer Code F2 E5: User interface failure

Medium · inspection needed

Code: F2 E5
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F2 E5 means

On Kenmore VMAX top-load washers whose model numbers start with 110, a Whirlpool-built platform, F2 E5 is a user interface failure. The control panel itself has stopped working correctly, so the washer cannot accept your cycle choices. The owner sees F2 E5 and the display or buttons may be dead. Unlike its neighbor F2 E4, this one points straight at the user interface control, which is normally the part that gets replaced.

Common causes of F2 E5

User interface control that has failed
Damage to the control panel from moisture or wear
Main board that is not supplying the panel

✓ One safe check you can try

1. Unplug the washer and plug it back in after a short wait. 2. See whether the display lights up. 3. Avoid pressing buttons repeatedly or using cleaners. 4. Call us if F2 E5 returns. 5. Take a photo of the display for the call.

! Why to stop there

Whether the interface control is the only part that has failed
Whether power and signals reach the panel
The exact interface control part for your VMAX model

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SdKenmore HE2 Front-Load Washer Code Sd: Too many suds SdKenmore HE5 Front-Load Washer Code Sd: Excessive suds SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds SFKenmore 402 Front-Load Washer Code SF: Control board error SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads

F2 E5F2 E5 questions

Is F2 E5 worse than F2 E4?

Not worse, just more direct. F2 E5 says the user interface failed outright, so replacement of that control is the usual repair. Both involve the control panel.

Will resetting help?

It rarely hurts to try, but a failed panel does not usually come back by itself. If F2 E5 returns, book a visit. The panel is a sealed electronic part, so it does not heal itself.

Can I order the part myself?

Ordering the wrong control causes F1 E3 or F2 E3 mismatch codes. We match the part to your model first. A wrong board sends you in circles.

Book a visit

Still seeing F2 E5?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152