Error code · Washer

Kenmore 110 Oasis Top-Load Washer Code F41 / F50 / F51: Motor not turning or not sensed

Medium · inspection needed

Code: F41 / F50 / F51
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F41 / F50 / F51 means

Oasis top-load washers from Kenmore with a 110. model-number prefix come from a Whirlpool-built platform. F41 and F51 report a motor RPS failure, where the rotor position sensor that reads drive motor speed is not giving the control a usable signal. F50 reports a stalled motor, where the control sees no rotation at all. You will see one of the codes on the display, and the basket may not turn or the spin may never start.

Common causes of F41 / F50 / F51

Wiring between the rotor position sensor and the main electronic control board
Rotor position sensor that no longer reports motor speed
Friction in the drive system that stops the basket from turning

✓ One safe check you can try

1. Open the lid and check that the basket turns freely by hand. 2. Look for a sock or small item caught between the basket and the tub. 3. Remove half the load and start a short cycle. 4. If the code returns, stop using the washer. The motor and its wiring are for us to test.

! Why to stop there

Whether the basket is binding or the sensor has failed
Whether the wiring between the sensor and the board is good
Whether F50 is real motor drag or only a missing signal

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle

F41 / F50 / F51F41 / F50 / F51 questions

What is the difference between F50 and F41 on an Oasis top-loader?

It means the control sees no rotation of the drive motor. On this Whirlpool-built top-load platform it can come from drag in the drive system as well as from the sensor signal, so we test both.

How are F41 and F51 different?

Both name the motor RPS failure, the sensor that reads motor speed. We treat them as one circuit, and we check the wiring and the sensor before we look at the main board.

Can an overloaded basket cause these codes?

A heavy or jammed load can make the motor stall. Lighten the load and test once. If it repeats, the cause is more likely in the sensor or drive.

Book a visit

Still seeing F41 / F50 / F51?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152