Kenmore 665 Range Code F4/E1: Meat probe shorted
On Kenmore 665. ranges, a Whirlpool-built platform, F4/E1 means the meat probe is shorted. The control measures the probe's resistance, and a healthy probe reads about 59,000 ohms at 70 degrees F, so a much lower…
- Code
- F4/E1 (665-prefix)
- Appliance
- Range
- Brand
- Kenmore
- Warranty
- 30-day workmanship
What F4/E1 (665-prefix) means
On Kenmore 665. ranges, a Whirlpool-built platform, F4/E1 means the meat probe is shorted. The control measures the probe's resistance, and a healthy probe reads about 59,000 ohms at 70 degrees F, so a much lower reading triggers the code. You will see F4/E1 on the display when a probe-controlled cook is started or the probe is plugged in. The oven itself may bake normally without the probe.
Common causes of F4/E1 (665-prefix)
- The meat probe itself, shorted
- The probe jack inside the oven
- Wiring from the jack to the control
- Control board input
1. Unplug the meat probe from the jack inside the oven and take it out. 2. Let the oven cool completely. 3. Give the control a 3-minute rest by unplugging the range, then plug it in again. 4. Try a normal bake without the probe. 5. If F4/E1 still shows with no probe in the oven, call us.
- If the code appears with no probe plugged in, the jack or wiring is the likely area
- If it appears only with the probe, the probe is the first suspect
- We test before replacing and quote in writing
Other Range codes
Can I bake without the probe?
Usually yes. F4/E1 is about the probe circuit, so a normal bake with the probe removed often works. Time and temperature settings are the ones to trust.
How do I know whether the probe or the oven is the cause?
Remove the probe. If the code goes away, the probe was shorted. If it stays, the jack or wiring needs a look from us.
Do I need a new probe?
Only if it is the cause. If the code disappears with the probe removed, the probe was shorted and is the likely replacement. A written price comes before any work, and our workmanship has a 30-day warranty.
Still unsure about F4/E1 (665-prefix)?
A technician diagnoses it on site and gives you the price in writing before any work starts.