Error code · Washer

Kenmore 796 Wi-Fi Front-Load Washer Code EE: Control board failure

Medium · inspection needed

Code: EE
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What EE means

On Kenmore Wi-Fi front-load washers whose model numbers start with 796, a platform built by LG, the code EE means an electronic control board failure. The main board has reported that it cannot operate normally, so the washer stops the cycle and shows EE on the display. The owner may find the washer unresponsive, with buttons doing nothing. A full power-down comes first, and a board check follows if the code stays.

Common causes of EE

Main electronic control board that has failed internally
Stored board data that is corrupted
Power interruption that left the board in a bad state

✓ One safe check you can try

1. Unplug the washer and leave it off for 5 minutes. 2. Restore power and see whether the code clears. 3. If it clears, run a short cycle to confirm normal operation. 4. If EE returns, leave the washer off and call us.

! Why to stop there

Whether the board recovers after a reset or the code returns right away
Whether the board is the only part involved
The right replacement board for a Wi-Fi 796 model if one is needed

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

rL / OU / F34Kenmore 110 HE Front-Load Washer Codes rL, OU and F34: Clothes in the Clean Washer cycle SdKenmore HE2 Front-Load Washer Code Sd: Too many suds SdKenmore HE5 Front-Load Washer Code Sd: Excessive suds SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds SFKenmore 402 Front-Load Washer Code SF: Control board error SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long

EEEE questions

What does EE mean on a Kenmore Wi-Fi washer?

EE is an electronic control board failure on the 796 Wi-Fi platform. The main board cannot function normally, so the washer stops and displays the code.

Will the five-minute unplug work?

It is the first thing to try, and it clears the code in some cases. If EE comes back after you restore power, the board needs a proper test and probably replacement.

Does the Wi-Fi feature matter for this code?

Not for the cause. The code concerns the main control board, so the Wi-Fi connection is not what we check first. The Wi-Fi feature is simply part of the model name here.

Book a visit

Still seeing EE?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152