Error code · Washer

Kenmore 110 Top-Load Washer Code F7 E7: Motor stuck below target speed

Medium · inspection needed

Code: F7 E7
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F7 E7 means

On Kenmore top-load washers whose model numbers start with 110., a Whirlpool-built platform with VMW and VMAX versions, F7 E7 means the motor cannot reach its target speed. Usually something mechanical is holding it back: a garment can get stuck between the outer tub and the spin basket, or drive parts can add friction. You will see F7 E7 on the display and the spin may start slowly, then stop.

Common causes of F7 E7

Item stuck between the outer tub and the spin basket
Excess friction in the drive parts
Motor or its wiring that cannot deliver full speed

✓ One safe check you can try

1. Open the lid and turn the spin basket by hand to see whether it moves freely. 2. Look for a sock or small garment caught under or around the basket. 3. Remove a part of the load and run a short spin. 4. If the basket feels stiff, stop using the washer and leave it unplugged.

! Why to stop there

Whether the friction is a trapped item or worn drive parts
Whether the motor reaches speed once the drag is removed
Whether wiring or the control is limiting the motor

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure rL / OU / F34Kenmore 110 HE Front-Load Washer Codes rL, OU and F34: Clothes in the Clean Washer cycle SdKenmore HE2 Front-Load Washer Code Sd: Too many suds SdKenmore HE5 Front-Load Washer Code Sd: Excessive suds SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds

F7 E7F7 E7 questions

Could something stuck near the basket trigger F7 E7?

It means the motor could not reach its target speed. On this Whirlpool-built VMW and VMAX platform the usual reason is friction, so a stuck garment or worn drive part is the first suspect.

Can an overloaded basket cause F7 E7?

Yes, a heavy load can add drag. Lighten the load and run it again. If the basket does not turn freely by hand, even empty, drive parts need inspection.

Can I keep running the washer?

Please do not. A struggling motor can overheat, which is a separate code on this platform. Let us inspect the drive before you run another load.

Book a visit

Still seeing F7 E7?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152