22-14609
Kenmore 22-14609 Dishwasher Repair
Most common issues on this model
- Plastic items still wet at the end of the cycle
- Water not reaching the lower spray arm
- Door latch noise or the unit not starting
- Odor from standing water in the tub
Kenmore lists the 22-14609 as a 24-inch electric built-in dishwasher with UltraWash Plus and TurboDry, in another colorway of the 14602 line. It shares the design of the 22-14605. Look for it in a standard under-counter opening.
The item gives no builder. We rely on the prefix at the start of the model on the data plate, which names the manufacturer, and we log the serial. Only then do we order a pump, heater or rack part for it.
An odor usually means water is sitting in the tub, so we trace the drain path, the filter and the check valve. If the lower arm gets no water, we test the circulation pump and look for debris. Plastics that stay wet are a heater and vent question. You get a price in writing before we begin, and we stand behind the repair with a 30-day warranty.
Key features
- 24-inch built-in dishwasher
- Electric
- UltraWash Plus system
- TurboDry
- A colorway of the 14602 line
Error codes this model can show
Why do plastics stay wet when the rest is dry?
Plastic holds less heat, so a weak heater or a vent that stays closed shows up there first. We test both and the drying control.
Can I clear a drain odor myself?
You can clean the filter and wipe the tub edge. If water still sits in the tub, we check the drain hose and pump, since the cause is usually in the drain path.
Do you service the door latch?
Yes. We test the latch and door switch together, replace the worn part and confirm the cycle starts reliably before we leave.
Book repair for your 22-14609
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.