Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Kenmore specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 955-7152 Get a Repair Quote
Error code · Refrigerator

Kenmore 795 Refrigerator Code Er gF: Water flow meter

On Kenmore 795. refrigerators, built by LG, Er gF is a flow meter error. The flow meter measures how much water passes to the dispenser and ice maker, and the code means it is not seeing…

Medium · inspection needed
Code
Er gF (795 / LG-built)
Appliance
Refrigerator
Brand
Kenmore
Warranty
30-day workmanship

What Er gF (795 / LG-built) means

On Kenmore 795. refrigerators, built by LG, Er gF is a flow meter error. The flow meter measures how much water passes to the dispenser and ice maker, and the code means it is not seeing the flow it expects, because of water pressure, water flow, or the meter itself. You may notice a slow or empty water dispenser, small or missing ice, or a dispenser that stops partway through filling a glass.

Common causes of Er gF (795 / LG-built)

  • Water supply valve not fully open
  • Kinked or frozen supply line
  • Water filter restricting flow
  • Flow meter or its wiring
✓ One safe check you can try

1. Confirm the water supply valve behind or beside the refrigerator is fully open. 2. Check the supply line for kinks, without moving the refrigerator far. 3. Replace the water filter if it is overdue. 4. Dispense a few glasses of water to clear air. 5. If Er gF returns, call us.

! Why to stop there
  • Low flow can come from the house supply, the filter, or the meter, and they need different fixes
  • We check supply and filter first, then the meter
  • Parts are ordered only after a written price is agreed
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
Er gF (795 / LG-built)Er gF (795 / LG-built) questions
Is this a leak?

The code is about flow measurement rather than a leak. Still, if you see water on the floor, close the supply valve and call us right away.

Could a filter cause Er gF?

Yes, a clogged filter reduces flow and can set the code. Replacing a filter that is overdue is a safe first step, and the dispenser should be run for a few glasses afterward.

What if the filter and supply are fine?

Then we test the flow meter and its wiring, since the meter itself may be reading wrong. You get a written price before any work, and our workmanship carries a 30-day warranty.

Book a visit

Still seeing Er gF (795 / LG-built)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call the desk ▤ Get a Repair Quote