Error code · Refrigerator

Kenmore 253 French-Door Refrigerator Code SH in Refrigerator Display: Shorted Fresh-Food Sensor

Medium · inspection needed

Code: SH in Refrigerator Display
Appliance: Refrigerator
Brand: Kenmore
Warranty: 30-day workmanship

What SH in Refrigerator Display means

This is a Kenmore French-door refrigerator whose model number starts with 253, a Gibson platform in the Electrolux and Frigidaire family. SH in the refrigerator display tells you the fresh-food compartment sensor circuit reads as shorted, below roughly 10 ohms. The control then has no usable temperature, so the compartment may run too cold, too warm or swing between the two.

Common causes of SH in Refrigerator Display

Shorted refrigerator compartment sensor
Damaged sensor wiring
Control board sensor input

✓ One safe check you can try

1. Confirm SH is shown in the refrigerator display. 2. Move items away from the back wall and clear the vents. 3. Keep the doors closed as much as you can. 4. Leave the sensor, its wiring and the panels to us.

! Why to stop there

Whether the sensor body or its wiring is the shorted part
We test connectors and leads before measuring the sensor
The control is considered only if the sensor circuit proves good

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

SH in Freezer DisplayKenmore 253 French-Door Refrigerator Showing SH in the Freezer Display: Shorted Sensor SY CE / SY CFKenmore 253 French-Door Refrigerator Code SY CE / SY CF: Control and Display Communication SY EFKenmore 253 French-Door Refrigerator Code SY EF: Evaporator Fan Circuit F1 Lo / F1 HiKenmore 111 Bottom-Freezer Refrigerator Code F1 Lo / F1 Hi: Freezer Temperature Sensor F3 / r3Kenmore 111 Bottom-Freezer Refrigerator Code F3 / r3: Defrost Heater FD Lo / FD Hi / rD Lo / rD HiKenmore 111 Bottom-Freezer Refrigerator Code FD Lo / rD Hi: Defrost Sensor Readings i5 Lo / i5 Hi / iD Lo / iD HiKenmore 111 Bottom-Freezer Refrigerator Code i5 / iD: Ice Maker and Ice Room Sensors Main Board LED 1, 2 or 3 FlickersKenmore 111 Top-Freezer Refrigerator: Main Board LED Flickers 1, 2 or 3 Sensor Failure

SH in Refrigerator DisplaySH in Refrigerator Display questions

Why would a sensor short?

Moisture, a crushed wire or an aging sensor can allow current to bypass its normal path, which the control reads as SH. We look at the wire route as well as the sensor body.

Can the display be cleared?

It may return on the next check if the short is real. Lasting relief requires repairing the circuit, and we confirm that the message stays away after the repair before we leave.

Is it the same as OP?

No. OP is an open circuit and SH is a short, so the tests differ even though both involve the fresh-food sensor. We tell you which one we found when we explain the repair.

Book a visit

Still seeing SH in Refrigerator Display?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152