Error code · Washer

Kenmore 417 Digital-Display Washer Code E67: Processor voltage error

Medium · inspection needed

Code: E67
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What E67 means

This E67 applies to Kenmore digital-display front-load washers from about 2014 onward, with model numbers starting 417. The control board has detected an incorrect voltage supplied to its microprocessor. Because the display and every cycle decision depend on that processor, the washer stops and shows E67 on the digital panel. Newer-style 417 controls monitor their own supply closely, so this code is the board telling you its internal power is not where it should be.

Common causes of E67

Electronic control board with an unstable internal processor supply
Incoming power that sags or spikes at the outlet
Damaged connection feeding power to the control board

✓ One safe check you can try

1. Unplug the washer and leave it off for 5 minutes. 2. Plug it back in and try a quick rinse cycle. 3. Confirm the outlet is a dedicated wall outlet with no power strip. 4. If E67 shows again, stop using the washer and book a visit with us.

! Why to stop there

Whether the supply to the board is clean when the washer is running
Whether a reset only hides a board that is about to fail completely
Which control board part number matches your digital-display model

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

PFKenmore Calypso Top-Load Washer Code PF: Power failure rL / OU / F34Kenmore 110 HE Front-Load Washer Codes rL, OU and F34: Clothes in the Clean Washer cycle SdKenmore HE2 Front-Load Washer Code Sd: Too many suds SdKenmore HE5 Front-Load Washer Code Sd: Excessive suds SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds SFKenmore 402 Front-Load Washer Code SF: Control board error SLKenmore Calypso Top-Load Washer Code SL: Excessive suds

E67E67 questions

Is E67 different on a digital-display 417 washer?

The meaning is the same, an incorrect voltage at the control board processor, but on 2014 and newer digital controls the display itself goes dark or locks up when it happens.

How long should I leave the washer unplugged?

Five minutes gives the board time to drain and restart fresh. If E67 reappears right after restoring power, a repeat reset will not help and the board needs testing.

Can I run laundry if E67 clears once?

If it clears and stays gone, you can continue, but a code that has appeared once can return. We can test the board before it strands a full load of wet laundry.

Book a visit

Still seeing E67?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152