Kenmore 110 VMAX Top-Load Washer Code F0 E3: Load too large
On Kenmore VMAX top-load washers whose model numbers start with 110, a Whirlpool-built platform, F0 E3 means an overload: the size of the load exceeds the washer's capacity. The washer stops and shows the code because…
- Code
- F0 E3 (110 / Whirlpool-built VMAX)
- Appliance
- Washer
- Brand
- Kenmore
- Warranty
- 30-day workmanship
What F0 E3 (110 / Whirlpool-built VMAX) means
On Kenmore VMAX top-load washers whose model numbers start with 110, a Whirlpool-built platform, F0 E3 means an overload: the size of the load exceeds the washer's capacity. The washer stops and shows the code because it cannot agitate and spin that much laundry. It is documented for the VMAX version only, not the VMW. The owner sees F0 E3 right after starting a big load, and the fix is usually just removing some items.
Common causes of F0 E3 (110 / Whirlpool-built VMAX)
- Load heavier or bulkier than the tub can handle
- Bulky items such as bedding or rugs absorbing too much water
- Basket that is packed beyond its capacity
1. Open the lid and take out some of the garments. 2. Spread the remaining items evenly around the basket. 3. Close the lid and restart the cycle. 4. If the code returns with a small load, call us. 5. Wash bulky bedding in smaller batches.
- Whether the washer is sensing an overload that is not really there
- Whether the drive and suspension are working properly
- Whether the load sensing needs checking
Other Washer codes
What counts as too large?
Anything that packs the basket tight or soaks up enough water to become very heavy. Bulky bedding is a common cause, so wash it in smaller loads.
Will F0 E3 clear itself?
Once you remove laundry and restart, the washer normally continues. If it keeps stopping with a modest load, something else is affecting the load sensing.
Is this code on every 110 washer?
No. It is documented for the VMAX top-load only, so a VMW washer showing something similar needs its own check. Tell us your model name from the label.
Still unsure about F0 E3 (110 / Whirlpool-built VMAX)?
A technician diagnoses it on site and gives you the price in writing before any work starts.