Error code · Washer

Kenmore 110 Oasis Top-Load Washer Code F02: User interface

Medium · inspection needed

Code: F02
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F02 means

On Kenmore Oasis top-load washers whose model numbers start with 110, a Whirlpool-built platform, F02 is a user interface failure. The control panel, where the buttons and display live, is not communicating properly with the main electronic control board. The owner sees F02 and the buttons may not respond or the cycle may refuse to start. The wiring between the two boards and the interface board itself are the two things checked.

Common causes of F02

Wire harness between the main control board and the user interface control board
User interface control board that has stopped responding
Main control board that is not communicating with the panel

✓ One safe check you can try

1. Unplug the washer for several minutes, then restore power. 2. Press Power and select a cycle. 3. Keep the console dry and do not open it yourself. 4. If F02 returns, call us. 5. Note which buttons still respond and tell us when you call.

! Why to stop there

Whether the connection between the boards is sound
Whether the user interface board is the one failing
Whether the main board needs attention too

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SFKenmore 402 Front-Load Washer Code SF: Control board error SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill

F02F02 questions

What does F02 mean on my Oasis?

It means the user interface, the panel with your buttons and display, has failed to communicate with the main board. The washer cannot take your selections.

Can I check the wiring myself?

The harness is inside the console, and we advise against opening it. We inspect the connection safely and tell you the cost first. Opening a console with the washer plugged in is not safe for owners.

Is a new panel always the answer?

No. If the connection is the issue, no new board is needed. We test before we quote. Sometimes the connection is all that needs attention, and that costs less than a new board.

Book a visit

Still seeing F02?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152