Error code · Washer

Kenmore 110 Oasis Top-Load Washer Code F52 / F53 / F54: Motor stop, heat and current

Medium · inspection needed

Code: F52 / F53 / F54
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F52 / F53 / F54 means

Kenmore Oasis top-load washers whose model numbers start with 110. belong to a Whirlpool-built platform. F52 means the drive motor failed to stop after the main electronic control board told it to. F53 means the motor control part of that board is overheating, and F54 means it is seeing an overcurrent. They share a page because all three point at motor control. You will see the code on the display and the washer stops.

Common causes of F52 / F53 / F54

F52: motor stop command not obeyed, traced to the main electronic control board
F53: motor control overheating, which can follow heavy friction in the drive system
F54: overcurrent in the motor circuit

✓ One safe check you can try

1. Lift the lid and turn the basket by hand to feel for drag. 2. Look for items wedged between the basket and the tub. 3. Reduce the load and start a short cycle. 4. If the code returns, stop using the washer and leave it unplugged for our visit.

! Why to stop there

Whether the drive is binding or the board is the real source
Which of the three codes you actually have
Whether the board runs cooler after the drag is removed

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds SFKenmore 402 Front-Load Washer Code SF: Control board error SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load

F52 / F53 / F54F52 / F53 / F54 questions

Why do F52, F53 and F54 share one page for the Oasis?

They are motor control codes on this Whirlpool-built platform: F52 a stop command the motor ignored, F53 overheating in the motor control section and F54 an overcurrent. The washer stops to protect itself.

Can friction cause F53 and F54?

Yes. Extra drag in the drive system raises current and heat in the control. Checking the basket turns freely is the first step, and we test the rest when drag is ruled out.

Does F52 always need a new board?

It is traced to the main board, but we confirm with testing first. A binding drive can also lead to related motor codes, so we check both, and you receive a written price before any part is ordered.

Book a visit

Still seeing F52 / F53 / F54?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152