Error code · Washer

Kenmore 110 HE5 Steam Washer Code F61 or F65: Steamer board link lost

Medium · inspection needed

Code: F61 or F65
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F61 or F65 means

On Kenmore HE5 Steam front-load washers whose model numbers start with 110., a Whirlpool-built platform, F61 and F65 both report a steamer communication failure. The steamer electronic control board and the main electronic control board are not exchanging data, so the steam function cannot be controlled. You will see the code on the display and the washer may stop before a steam cycle, or refuse to run it at all.

Common causes of F61 or F65

Loose or damaged wiring between the steamer electronic control board and the main control board
Steamer electronic control board that does not answer
Main control board that is not receiving the steamer signal

✓ One safe check you can try

1. Try a cycle that does not use steam to see whether the washer otherwise runs. 2. Check that both water faucets behind the washer are open. 3. Do not open the cabinet or touch the steamer wiring. 4. Leave the washer unplugged if it keeps stopping.

! Why to stop there

Whether the break is in the harness or in the steamer board
Whether the main board is receiving the steamer link
Whether non-steam cycles can continue safely until the repair

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure rL / OU / F34Kenmore 110 HE Front-Load Washer Codes rL, OU and F34: Clothes in the Clean Washer cycle SdKenmore HE2 Front-Load Washer Code Sd: Too many suds SdKenmore HE5 Front-Load Washer Code Sd: Excessive suds SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared

F61 or F65F61 or F65 questions

Why would the steam board stop talking to the main board?

It means the steamer board and the main board are not communicating. On this Whirlpool-built platform the steam function depends on that link, so the control stops and shows F61 or F65.

Do F61 and F65 call for separate repairs?

Both appear for the same steamer communication problem on this washer, so they share a repair path. We test the wiring and both boards before suggesting a part.

Can I still wash without steam?

Often non-steam cycles still run, but the code may come back. We would rather test the link between the boards than have you work around it, and we give a written price before any work begins.

Book a visit

Still seeing F61 or F65?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152