Error code · Washer

Kenmore 110 VMAX Top-Load Washer Code F7 E4 and F7 E5: Clutch will not grip for spin

Medium · inspection needed

Code: F7 E4 and F7 E5
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F7 E4 and F7 E5 means

On Kenmore VMAX top-load washers whose model numbers start with 110., a Whirlpool-built platform, F7 E4 and F7 E5 both report clutch failure: the clutch did not engage the spin basket when spin began. The washer washes but the basket does not spin out the water, so loads stay soaked. You will see one of the codes on the display. On the VMW version of this platform, F7 E5 is a different code, a shifter assembly problem.

Common causes of F7 E4 and F7 E5

Obstruction around the clutch
Clutch damaged and unable to engage
Wiring between the clutch and the main electronic control board

✓ One safe check you can try

1. Stop the cycle and open the lid. 2. Check for anything caught around the basket or under the impeller. 3. Do not wring out heavy loads by hand beyond what is safe. 4. Leave the cabinet closed. The clutch and its wiring are for us to test.

! Why to stop there

Whether the clutch is mechanically damaged or blocked
Whether the wiring to the clutch is loose
Whether the main board is sending the engage signal

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure rL / OU / F34Kenmore 110 HE Front-Load Washer Codes rL, OU and F34: Clothes in the Clean Washer cycle SdKenmore HE2 Front-Load Washer Code Sd: Too many suds SdKenmore HE5 Front-Load Washer Code Sd: Excessive suds SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds

F7 E4 and F7 E5F7 E4 and F7 E5 questions

Why are my clothes still wet with F7 E4 on a VMAX?

It means the clutch did not engage the spin basket. On this Whirlpool-built platform the basket then cannot spin out water, and the control flags clutch failure with F7 E4 or F7 E5.

Is F7 E5 always a clutch problem?

Only on the VMAX. On a VMW washer, F7 E5 points to the shifter assembly instead. Confirm your version before reading the code, and tell us the model number when you book so we bring the right checks.

Why is my laundry soaking wet?

Without the clutch, the basket does not spin. Drain the tub if you can, then call us. Please do not keep restarting the cycle, since the washer cannot complete a spin until the clutch is checked.

Book a visit

Still seeing F7 E4 and F7 E5?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152