Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Kenmore specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 955-7152 Get a Repair Quote
Error code · Dryer

Kenmore 110 VMAX Dryer Code F4 E4 (110 / Whirlpool-built VMAX): Low Line Voltage

Kenmore 110 VMAX dryers, built by Whirlpool, treat F4 E4 as low or no line voltage, the same condition as L2. It points to a problem in the home's power supply that keeps the heater from…

Medium · inspection needed
Get a Repair Quote(713) 955-7152
Code
F4 E4 (110 / Whirlpool-built VMAX)
Appliance
Dryer
Brand
Kenmore
Warranty
30-day workmanship

What F4 E4 (110 / Whirlpool-built VMAX) means

Kenmore 110 VMAX dryers, built by Whirlpool, treat F4 E4 as low or no line voltage, the same condition as L2. It points to a problem in the home's power supply that keeps the heater from turning on. The owner sees the code and the drum may turn while the air stays cool. A dryer circuit has two poles, so one breaker leg dropping out is enough to cause it.

Common causes of F4 E4 (110 / Whirlpool-built VMAX)

  • Two-pole breaker with one leg off
  • Cord installed incorrectly
  • Outlet or terminal connection
  • Heater not receiving full voltage
✓ One safe check you can try

1. Check both poles of the dryer breaker, and reset it if tripped. 2. Check that the power cord is installed correctly. 3. Run a Timed Dry heated cycle. 4. If the code stays, call an electrician or us. 5. Do not open the dryer's terminal area.

! Why to stop there
  • It remains unclear whether the cause sits in the house supply or in the dryer's terminal and cord connection.
  • We measure the supply at the outlet before testing the dryer.
  • You see a written price first, and the work carries a 30-day warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

PFKenmore 110 Dryer Code PF: power was lost mid-cycle PS / tE4 / Add Water (796 / LG-built steam)Kenmore Elite 796 Steam Dryer Code PS / tE4 / Add Water (796 / LG-built steam): Supply and Sensor tE1 / tE2 (796 / LG-built)Kenmore Elite 796 Dryer Code tE1 / tE2 (796 / LG-built): Temperature Sensor F4 E1 / F4 E2 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E1 / F4 E2 (110 / Whirlpool-built VMAX): Heater System F4 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E3 (110 / Whirlpool-built VMAX): vent or lint screen restricted F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F6 E2 / F6 E3 (110 / Whirlpool-built VMAX): Communication Line F7 E1Kenmore 110 Dryer Code F7 E1: Motor System HSKenmore Elite 796 Dryer Code HS: Humidity Sensor
F4 E4 (110 / Whirlpool-built VMAX)F4 E4 (110 / Whirlpool-built VMAX) questions
Why would a dryer lose power on one leg?

A two-pole breaker can trip on only one side, or a connection can loosen over time. Either one leaves the heater without proper voltage while the drum still turns. Check the breaker panel first.

How does F4 E4 relate to L2?

Yes. On this 110-series, Whirlpool-built platform both describe the same low line voltage condition, and the same breaker and cord checks apply. Photograph the breaker position before you reset it.

Can I reset the breaker myself?

Yes. Switch it fully off and then on. Leave any wiring work at the outlet or terminal block to an electrician or to us. That one fix is often enough.

Book a visit

Still seeing F4 E4 (110 / Whirlpool-built VMAX)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152
☎ Call the desk ▤ Get a Repair Quote