Error code · Dryer

Kenmore 110 VMAX Dryer Code F4 E1 / F4 E2 (110 / Whirlpool-built VMAX): Heater System

Medium · inspection needed

Code: F4 E1 / F4 E2 (110 / Whirlpool-built VMAX)
Appliance: Dryer
Brand: Kenmore
Warranty: 30-day workmanship

What F4 E1 / F4 E2 (110 / Whirlpool-built VMAX) means

A Kenmore VMAX dryer with the 110 prefix is Whirlpool-built, and on it F4 E1 points to the heater system, meaning the heater or its relays. F4 E2 is documented only for Whirlpool's laundry-tower dryer and not on the standard dryer pages, so we do not confirm it for this platform. The owner sees the code alternate in the display and the dryer may tumble without making heat.

Common causes of F4 E1 / F4 E2 (110 / Whirlpool-built VMAX)

Heater element or its circuit
Heater relays on the control
Wiring to the heater
Line voltage reaching the dryer

✓ One safe check you can try

1. Empty the lint screen and keep the vent clear. 2. Switch off the dryer breaker for a minute, then switch it on. 3. Start Timed Dry and check that the drum turns. 4. Watch the display for about a minute. 5. If the dryer stays cool or the F4 code returns, call us.

! Why to stop there

F4 E1 names the heating system and not a single part, so the relay and the element both stay on our list.
We confirm the supply voltage and test the heater circuit before quoting.
F4 E2 stays unconfirmed for this platform until we see the dryer.
You approve the written price first, and a 30-day warranty applies.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

F4 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E3 (110 / Whirlpool-built VMAX): vent or lint screen restricted F4 E4 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E4 (110 / Whirlpool-built VMAX): Low Line Voltage F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F6 E2 / F6 E3 (110 / Whirlpool-built VMAX): Communication Line F7 E1Kenmore 110 Dryer Code F7 E1: Motor System HSKenmore Elite 796 Dryer Code HS: Humidity Sensor L2Kenmore 110 Dryer Code L2: Low or No Line Voltage nP / gASKenmore Elite 796 Dryer Code nP / gAS: Power Cord and House Supply PFKenmore 110 Dryer Code PF: power was lost mid-cycle

F4 E1 / F4 E2 (110 / Whirlpool-built VMAX)F4 E1 / F4 E2 (110 / Whirlpool-built VMAX) questions

What does F4 E1 mean?

It points to the heater system on a 110-series, Whirlpool-built dryer, which includes the heater and its relays. We test the circuit instead of assuming one part.

What about F4 E2?

It is documented only on a Whirlpool laundry-tower dryer, so we do not confirm it for a standard Kenmore 110. We read the display and decide on site.

Will the dryer still tumble?

It may, but without heat. Clothes stay cool and damp, and a cycle that finishes with wet laundry is often the first thing owners notice.

Book a visit

Still seeing F4 E1 / F4 E2 (110 / Whirlpool-built VMAX)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152