Error code · Dryer

Kenmore 110 VMAX Dryer Code F6 E2 / F6 E3 (110 / Whirlpool-built VMAX): Communication Line

Medium · inspection needed

Code: F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)
Appliance: Dryer
Brand: Kenmore
Warranty: 30-day workmanship

What F6 E2 / F6 E3 (110 / Whirlpool-built VMAX) means

On the 110-prefix Kenmore VMAX dryer, a Whirlpool-built platform, Whirlpool names F6 E1 as a communication error among the main control, the user interface and the wiring. The F6 E2 and F6 E3 pages give only a power-cycle procedure, so we read them as the same communication family. That is an inference, not a printed meaning. The owner sees the code alternate and the buttons may not control the dryer.

Common causes of F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)

Data link between console and main control
Wiring harness connectors
Console board
Main control

✓ One safe check you can try

1. Wipe the console dry. 2. Take power off at the breaker for one minute and put it back. 3. Run a Timed Dry cycle. 4. Keep an eye on the display for the first minute. 5. If F6 shows again, stop, because the wiring and boards need a proper test.

! Why to stop there

We cannot confirm E2 or E3 as communication codes from a document, only as a family guess.
We inspect connections first and then test the console and control.
The estimate is in writing before work, and our 30-day warranty applies.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

F4 E1 / F4 E2 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E1 / F4 E2 (110 / Whirlpool-built VMAX): Heater System F4 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E3 (110 / Whirlpool-built VMAX): vent or lint screen restricted F4 E4 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E4 (110 / Whirlpool-built VMAX): Low Line Voltage F7 E1Kenmore 110 Dryer Code F7 E1: Motor System HSKenmore Elite 796 Dryer Code HS: Humidity Sensor L2Kenmore 110 Dryer Code L2: Low or No Line Voltage nP / gASKenmore Elite 796 Dryer Code nP / gAS: Power Cord and House Supply PFKenmore 110 Dryer Code PF: power was lost mid-cycle

F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)F6 E2 / F6 E3 (110 / Whirlpool-built VMAX) questions

Are F6 E2 and F6 E3 communication codes?

Whirlpool lists F6 E1 as one. The E2 and E3 pages give only a power cycle, so we read them as part of the same family and say so plainly.

Will turning the breaker off fix it?

It may clear a one-time glitch. If the code returns after the Timed Dry check, the wiring and boards need testing, and we do that on site. We do not guess which board is involved.

Is my Kenmore a Whirlpool dryer?

Kenmore 110-series dryers are Whirlpool-built, but we are an independent repair company and are not affiliated with Whirlpool in any way. Our visit settles it either way.

Book a visit

Still seeing F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152