Error code · Washer

Kenmore 110 HE Front-Load Washer Code F/09: Overflow condition

High · stop use, call now

Code: F/09
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F/09 means

On older Kenmore HE front-load washers whose model numbers start with 110, a Whirlpool-built platform with the F/xx display, F/09 means an overflow. The drain pump runs constantly in an effort to get rid of the water, because the water level is higher than it should be. The owner hears the pump keep running and sees F/09. If the drum is overfilled, the water inlet valve may not be shutting off. If the drum is empty, the level reading itself is suspect.

Common causes of F/09

Water inlet valve assembly that does not shut off water flow
Water level sensing that reports a false overflow
Drain pump that cannot keep up with incoming water

✓ One safe check you can try

1. Turn off the water supply valves behind the washer. 2. Unplug the washer if water is rising or leaking. 3. Do not open the door while it is full of water. 4. Call us and describe whether the drum was full or empty.

! Why to stop there

Whether the inlet valve is leaking through when the washer is off
Whether the washer is truly overfilled or the level reading is wrong
Whether the drain pump and hose are clearing water as designed

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure

F/09F/09 questions

Why does the pump keep running with F/09?

The washer thinks there is too much water, so it runs the drain pump nonstop to remove it. That is a protective response to an overflow reading.

What should I do first?

Close the water supply valves and unplug the washer if the level is high. This prevents more water entering while we check the inlet valve and level sensing.

Can F/09 appear when the drum is empty?

Yes, it can, and that points us toward the level sensing rather than the inlet valve. We test both during the visit and quote in writing first.

Book a visit

Still seeing F/09?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152