Error code · Washer

Kenmore 110 HE Front-Load Washer Code F/13: Detergent dispenser circuit

Medium · inspection needed

Code: F/13
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F/13 means

On older Kenmore HE front-load washers whose model numbers start with 110, a Whirlpool-built platform with the F/xx display, F/13 is a dispenser circuit error. The dispenser cannot move into position. You usually hear the dispenser system shifting constantly before the code appears. The washer is trying to line up the dispenser to release detergent or additives and cannot, so it stops. The owner sees F/13 and may find the dispenser drawer behaving strangely.

Common causes of F/13

Mechanical linkage on the dispenser housing that is damaged or stuck
Dispenser drive that cannot reach its position
Wiring or control circuit for the dispenser

✓ One safe check you can try

1. Pull the dispenser drawer out if it slides freely and look for caked detergent. 2. Wipe away residue and push the drawer back in fully. 3. Do not force anything that resists. 4. Call us if F/13 returns. 5. Keep detergent poured only into the drawer compartments.

! Why to stop there

Whether the linkage is physically damaged or only blocked by residue
Whether the dispenser drive runs when commanded
Whether the circuit that moves the dispenser is intact

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle

F/13F/13 questions

Why does my dispenser make noise before F/13?

The washer is repeatedly trying to move the dispenser into position and failing. That constant shifting sound is the cue that something in the dispenser mechanism is stuck.

Can detergent buildup cause it?

Residue can block the drawer and add resistance. Cleaning is worth trying, but if the drawer is clean and the code remains, the linkage or drive needs inspection.

Do I need a new dispenser?

Not necessarily. Damaged linkage can often be repaired or replaced as a part. We inspect first and give a written price before any work. Bring the model number to the call so we bring the right linkage part.

Book a visit

Still seeing F/13?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152