Error code · Washer

Kenmore 110 HE Front-Load Washer Code F/15: Motor control board error

Medium · inspection needed

Code: F/15
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F/15 means

On older Kenmore HE front-load washers whose model numbers start with 110, a Whirlpool-built platform with the F/xx display, F/15 is a motor control board error. The board that drives the motor has reported a problem with itself or its connections. The washer cannot reliably turn the drum, so it stops and shows F/15. The owner sees the code and a cycle that will not finish, often with clothes and water still in the drum.

Common causes of F/15

Wire harness connections on the motor control board
Drive motor connections that are loose or corroded
Motor control board that has failed internally

✓ One safe check you can try

1. Switch the washer off and let it sit briefly. 2. Restart and try a drain and spin cycle to clear water. 3. Keep the door shut until the water has drained. 4. If F/15 returns, call us. 5. Do not open the cabinet to chase wiring.

! Why to stop there

Whether the connections are sound before the board is blamed
Whether the drive motor responds to the board
Whether the board itself needs replacing

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure

F/15F/15 questions

What does F/15 point to?

It points to the motor control board, the part that powers the drive motor. The board or its connections are reporting a problem, so the cycle stops.

Is the motor control board always the culprit?

Not always. Loose harness or motor connections can give the same code, so we check them first. Replacement is usually considered only when the wiring is sound.

What about the water left in the drum?

Try a drain and spin cycle. If the washer will not drain, call us and we can advise how to remove the water safely. Never open the door against standing water.

Book a visit

Still seeing F/15?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152