Error code · Washer

Kenmore 417 Front-Load Washer Code E95: Control board communication error

Medium · inspection needed

Code: E95
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What E95 means

On Kenmore front-load washers whose model numbers start with 417, E95 is an electronic control board communication error. The main board has stopped communicating correctly with the parts it manages, so it halts the cycle and shows the code. The owner usually sees E95 on the display and a washer that will not continue. It is a board-level message, not a water supply or drain message, and the washer may behave normally again after being powered down.

Common causes of E95

Electronic control board that has locked up and lost communication
Temporary electrical glitch that a full power-down can clear
Control board that has failed and keeps repeating the error

✓ One safe check you can try

1. Unplug the washer and leave it off for 5 minutes. 2. Plug it back in and start a short cycle. 3. If E95 does not return, you can continue normal use. 4. If E95 comes back, leave the washer unplugged and call us.

! Why to stop there

Whether the code was a one-time glitch or a board that keeps failing
Whether the board shows other signs of damage once powered up
The correct control board for your model if a replacement is needed

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle

E95E95 questions

What does E95 mean on a 417 Kenmore washer?

It means the electronic control board reported a communication error. The board is the washer's brain, so when it cannot communicate correctly, the cycle stops.

Does unplugging for five minutes really help?

Yes, it can. A full power-down lets the board restart from scratch and may clear a one-time glitch. If E95 returns after that, the board itself is the likely issue.

How soon should I call?

If E95 clears and stays away, there is no rush. If it keeps returning, call us, because a repeat code tends to mean the board is going.

Book a visit

Still seeing E95?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152