Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Kenmore specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 955-7152 Get a Repair Quote
Error code · Dryer

Kenmore Elite 796 Dryer Code nP / gAS: Power Cord and House Supply

For Kenmore Elite dryers with a 796 prefix, an LG-built platform, nP is listed together with PS in the troubleshooting section and refers to the power cord or the house supply. It suggests the cord is…

Medium · inspection needed
Get a Repair Quote(713) 955-7152
Code
nP / gAS
Appliance
Dryer
Brand
Kenmore
Warranty
30-day workmanship

What nP / gAS means

For Kenmore Elite dryers with a 796 prefix, an LG-built platform, nP is listed together with PS in the troubleshooting section and refers to the power cord or the house supply. It suggests the cord is not connected correctly or the household power is wrong. If your display shows gAS and you smell gas, leave the house and call the gas utility from outside.

Common causes of nP / gAS

  • Cord installed correctly at the terminal block
  • Neutral wire on the center terminal
  • Breakers or fuses at the panel
  • House supply voltage
✓ One safe check you can try

1. If you smell gas, leave the house and call the gas utility from outside. 2. Otherwise, check the dryer breakers and reset any that tripped. 3. Check the cord connection at the dryer. 4. Do not move the neutral wire yourself. 5. Call us for a cord and terminal check.

! Why to stop there
  • The code names the supply side, but not which of the cord, the terminal block or the house wiring is responsible.
  • We check the cord connection and the supply before we touch the dryer circuits.
  • A written price comes first, and our 30-day warranty applies.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

F4 E1 / F4 E2 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E1 / F4 E2 (110 / Whirlpool-built VMAX): Heater System F4 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E3 (110 / Whirlpool-built VMAX): vent or lint screen restricted F4 E4 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E4 (110 / Whirlpool-built VMAX): Low Line Voltage F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F6 E2 / F6 E3 (110 / Whirlpool-built VMAX): Communication Line F7 E1Kenmore 110 Dryer Code F7 E1: Motor System HSKenmore Elite 796 Dryer Code HS: Humidity Sensor L2Kenmore 110 Dryer Code L2: Low or No Line Voltage PFKenmore 110 Dryer Code PF: power was lost mid-cycle
nP / gASnP / gAS questions
What is nP pointing to?

It is a power cord or house supply problem on a 796-series, LG-built Kenmore Elite dryer, and it is listed together with PS in the troubleshooting section.

Does gAS mean a gas leak?

Not by itself. But if you smell gas at any time, leave the house at once and call the gas utility from outside, before you touch the dryer.

Who should check the cord?

We do. It involves the terminal block and the neutral wire on the center terminal, which should not be handled casually by owners. Gas smell always comes first.

Book a visit

Still seeing nP / gAS?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152
☎ Call the desk ▤ Get a Repair Quote