Error code · Washer

Kenmore 110 VMAX Top-Load Washer Code F2 E4: User interface error

Medium · inspection needed

Code: F2 E4
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F2 E4 means

On Kenmore VMAX top-load washers whose model numbers start with 110, a Whirlpool-built platform, F2 E4 is a user interface control error. The panel and the main electronic control board are not exchanging signals correctly. The owner sees F2 E4 and the buttons or display may not work. The wire harness connection between the main control board and the user interface control is checked first, and the interface control is replaced if the harness is fine.

Common causes of F2 E4

Wire harness connection between the main board and the user interface control
User interface control that has stopped responding
Panel damaged by moisture or wear

✓ One safe check you can try

1. Unplug the washer for a few minutes and restore power. 2. Try the buttons again. 3. Keep the panel dry and do not open the console. 4. Call us if F2 E4 repeats. 5. Note which buttons respond and which do not.

! Why to stop there

Whether the harness is making a proper connection
Whether the interface control responds when connected
Whether the main board is the real problem

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load uLKenmore 110 Oasis Top-Load Washer Code uL: Unbalanced load Wash LED onKenmore 110 VMW Top-Load Washer Wash Light On: No fill or slow fill PFKenmore 796 Front-Load Washer Code PF: Power failure during the cycle PFKenmore 796 Wi-Fi Front-Load Washer Code PF: Power loss message PFKenmore Calypso Top-Load Washer Code PF: Power failure

F2 E4F2 E4 questions

How does F2 E4 differ from F2 E5?

F2 E4 is an interface control error where the connection is worth checking. F2 E5 is a user interface failure where the control itself is the part replaced.

Is it a quick fix?

If a harness is loose, yes. If the user interface control has failed, it needs replacing, and we give the price before we begin. Either way, you approve the price first.

Can spills cause this?

Moisture in the panel can, yes. Avoid spraying cleaner into the console. Spills, steam and damp cloths are common sources of panel damage, so wipe the console only lightly and keep it dry afterward.

Book a visit

Still seeing F2 E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152