Error code · Washer

Kenmore 110 VMAX Top-Load Washer Code F7 E0: Washer lost electrical power

Medium · inspection needed

Code: F7 E0
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F7 E0 means

On Kenmore VMAX top-load washers whose model numbers start with 110., a Whirlpool-built platform, F7 E0 means the washer lost electrical power. The control noticed the supply drop out and recorded it, and the display now shows F7 E0. You may find the washer off or stopped midway through a cycle. The cause can be as simple as a loose plug or as involved as a power cord connection inside the cabinet. On the VMW version of this platform, F7 codes mean other things.

Common causes of F7 E0

Power cord not seated firmly at the outlet
Power cord damaged along its length
Power cord wiring connection on the main electronic control board
Supply at the electrical outlet

✓ One safe check you can try

1. Push the power cord plug fully into the outlet. 2. Look along the cord for cuts, crushed spots or heat marks. Do not use the washer if the cord is damaged. 3. Try another working appliance in the same outlet to see whether the outlet has power. 4. Do not open the cabinet to reach the cord connections.

! Why to stop there

Whether the outlet itself delivers proper voltage, which an electrician should verify
Whether the cord connection on the board is loose
Whether the cord needs replacing

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds SFKenmore 402 Front-Load Washer Code SF: Control board error SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load

F7 E0F7 E0 questions

Should I worry if F7 E0 shows after a storm?

It means the washer lost electrical power. On this Whirlpool-built top-load platform the control logs the interruption and shows F7 E0 after the supply returns.

Is the washer safe to use after F7 E0?

If the cord and plug look undamaged and the outlet works, it usually runs again. A damaged cord or a hot plug is a reason to stop and call us.

Should an electrician look at the outlet?

If another appliance also fails there, yes. Outlet voltage is for an electrician to confirm. We handle the washer side, including the cord and the connection on the board.

Book a visit

Still seeing F7 E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152