Error code · Washer

Kenmore 110 HE5 Front-Load Washer Code F70 / F71: Panel link lost

Medium · inspection needed

Code: F70 / F71
Appliance: Washer
Brand: Kenmore
Warranty: 30-day workmanship

What F70 / F71 means

Kenmore HE5 and HE5 Steam front-load washers whose model numbers start with 110. come from a Whirlpool-built platform. F70 and F71 report no communication between the main electronic control board and the user interface control, the panel with your buttons and display. You will see the code on the display, or a panel that behaves oddly. The codes are not listed for the HE2, and F70 means something different on the Oasis top-load: overloaded.

Common causes of F70 / F71

Loose or damaged wiring between the main electronic control board and the user interface control
User interface control that no longer answers
Main electronic control board that does not receive the panel signals

✓ One safe check you can try

1. Press the control panel buttons to see whether it responds. 2. Check that the panel is dry and clean. 3. Start a short cycle and note whether the drum rotates before the code appears. 4. Leave the washer closed. The wiring behind the panel is not owner work.

! Why to stop there

Whether the break is in the wiring or one of the boards
Whether the drum turning first points to the panel or the main board
Which board stops answering, tested before any part is quoted

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SdKenmore HE5 Steam Front-Load Washer Code Sd: Suds not cleared Sd or F71Kenmore 110 Oasis Top-Load Washer Codes Sd and F71: Excessive suds SFKenmore 402 Front-Load Washer Code SF: Control board error SLKenmore Calypso Top-Load Washer Code SL: Excessive suds Spin LED onKenmore 110 VMW Top-Load Washer Spin Light On: Drain took too long Sud / SUDSKenmore Washer Codes Sud and SUDS: Excessive suds on 110, 796 and 402 front-loads tEKenmore 796 Washer Code tE: Thermistor and heating UEKenmore 796 Washer Code UE: Unbalanced load

F70 / F71F70 / F71 questions

Is F70 the same thing on every Kenmore 110 washer?

It means the main control board and the user interface control have lost contact. On this Whirlpool-built front-load platform the control stops until the link is restored, and shows F70 or F71.

Is F70 the same as overloaded on my top-load?

No. On the Oasis top-load, F70 means overloaded. On the HE5 front-load it is a communication code. Always check the model-number prefix and the washer type before reading a code from the web.

Can a reset fix F70?

We do not suggest a reset sequence for this code. If the washer starts normally and F70 returns, the link needs testing. We trace the wiring and both boards and quote in writing before any work.

Book a visit

Still seeing F70 / F71?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152