Kenmore 110 VMW Top-Load Washer Code F8 E5: Hoses look reversed
On Kenmore VMW top-load washers whose model numbers start with 110., a Whirlpool-built platform, F8 E5 means the hot and cold fill hoses are reversed. The control compares the water temperature it measures with what it…
- Code
- F8 E5
- Appliance
- Washer
- Brand
- Kenmore
- Warranty
- 30-day workmanship
What F8 E5 means
On Kenmore VMW top-load washers whose model numbers start with 110., a Whirlpool-built platform, F8 E5 means the hot and cold fill hoses are reversed. The control compares the water temperature it measures with what it asked for, and when they disagree it assumes the hoses are on the wrong faucets. You will see F8 E5 on the display. If the hoses are correct, the inlet water thermistor in the valve wire harness may be the cause.
Common causes of F8 E5
- Hot and cold fill hoses connected to the wrong faucets
- Inlet water thermistor reading wrongly
- Inlet valve wiring harness
1. Look at the hoses behind the washer. The hot hose goes to the hot faucet and the cold hose to the cold. 2. If they are swapped, close the faucets and correct them with the washer unplugged. 3. Open the faucets and check for leaks. 4. Run a short cycle.
- Whether the hoses were right all along and the thermistor misreads
- Whether the valve wiring harness is sound
- Whether any leaks developed at the hose connections
Other Washer codes
How can I tell whether my hoses are swapped when F8 E5 appears?
It means the control thinks the hot and cold hoses are reversed. On this Whirlpool-built top-load washer it compares measured and expected water temperature and stops when they do not match.
How do I tell which hose is which?
The hot faucet and hose are typically marked, and the water from the hot faucet feels warm at the tap. Make sure each hose reaches the matching washer inlet.
What if the hoses are correct?
Then the inlet water thermistor is the likely cause, since it feeds the temperature reading. We test it before replacing it, and the written price comes first.
Still unsure about F8 E5?
A technician diagnoses it on site and gives you the price in writing before any work starts.