Error code · Dryer

Kenmore 417 Dryer Code E10 / E11 / E12 / EAF (417-prefix): Control Memory and Processor

Medium · inspection needed

Code: E10 / E11 / E12 / EAF (417-prefix)
Appliance: Dryer
Brand: Kenmore
Warranty: 30-day workmanship

What E10 / E11 / E12 / EAF (417-prefix) means

Kenmore dryers whose model numbers start with 417 are a platform we associate with Frigidaire and Electrolux construction, though the prefix link is not documented. On it, E10 is a general memory error, E11 a checksum error, E12 a non-fatal read or write error, and EAF a watchdog reset. All four describe the control's own memory or processor, not a communication problem between board and console. The owner sees the code and the dryer may not start or may stop at random.

Common causes of E10 / E11 / E12 / EAF (417-prefix)

Control memory and processor
Power glitch that disturbed the control
Connections to the control board
Control board replacement need if it persists

✓ One safe check you can try

1. Unplug the dryer for a few minutes, then plug it back in. 2. Check that the outlet or cord connection is secure and the breaker is on. 3. Start a short cycle and see if the code returns. 4. Note which code appears and when. 5. Do not open the console.

! Why to stop there

A control memory code can be a one-time hiccup or a board that is going bad, and the display cannot tell which.
We clear the code and see whether it returns before we quote a control.
You get a written price first, and the repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

F4 E4 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F4 E4 (110 / Whirlpool-built VMAX): Low Line Voltage F6 E2 / F6 E3 (110 / Whirlpool-built VMAX)Kenmore 110 VMAX Dryer Code F6 E2 / F6 E3 (110 / Whirlpool-built VMAX): Communication Line F7 E1Kenmore 110 Dryer Code F7 E1: Motor System HSKenmore Elite 796 Dryer Code HS: Humidity Sensor L2Kenmore 110 Dryer Code L2: Low or No Line Voltage nP / gASKenmore Elite 796 Dryer Code nP / gAS: Power Cord and House Supply PFKenmore 110 Dryer Code PF: power was lost mid-cycle PS / tE4 / Add Water (796 / LG-built steam)Kenmore Elite 796 Steam Dryer Code PS / tE4 / Add Water (796 / LG-built steam): Supply and Sensor

E10 / E11 / E12 / EAF (417-prefix)E10 / E11 / E12 / EAF (417-prefix) questions

What do E10, E11, E12 and EAF have in common?

They all concern the control's own memory or processor on a 417-series dryer. They do not point to the heater, the drum or the vent.

Is E12 serious?

It is described as a non-fatal read or write error, so the dryer may keep working. If it repeats, we inspect the control instead of waiting for a harder failure.

Is this an Electrolux dryer?

The 417 series appears to be built by Frigidaire or Electrolux, but the prefix link is not documented and we do not claim any affiliation with either company.

Book a visit

Still seeing E10 / E11 / E12 / EAF (417-prefix)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-7152